Shor International - Silversmithing Stakes, Anvils & Holders

Silversmithing Stakes, Anvils & Holders
Back to Silversmithing & Chasing Gateway Also see: Anvils Silversmithing Books

Silversmithing is the ancient art of shaping or raising metal from sheet form. Designed by silversmiths for silversmith, Shor silversmith tools will provide a lifetime of service.

American Made Anvils and Stakes

Silversmithing 14 pc. Starter Set B

It includes 1 adapter, 1 cast iron base and 12 of the most commonly used stakes and anvil heads. Made in Europe.

Flat

265.500 Buy

Price $299.95

Domed

265.500A Buy

Price $349.95

shipping weight 40 lbs. returns subject to 15% restocking charge

Planishing Stakes
Planishing occurs after completion of the forming stage. Choose the stakes below that conform most closely to the desired shape of the finished work. Using a lightweight hammer and starting at the middle, strike the piece with a steady pattern and work towards the edge. Each of these stakes has a highly polished working surface. For holders suitable for mounting these stakes, see Stake Holders. Made in USA

Stake

Wedge
38 x 41
38mm Tall

Curved
57 x 35 mm
Tapers to 25

Round, Flat 60mm

Egg, Flat
95 x 51 mm

Oblong, Flat
60 x 29 mm

Square, Flat
70 mm

Stock#

12.441 Buy

$195.99

12.423 Buy

$204.99

12.429 Buy

$99.99

12.428 Buy

$144.99

12.427 Buy

$140.90

12.426 Buy

$99.99

Stake

Spoon Stake 42x22 mm

Curved 57mm Long x 35mm

Slightly Curved 44x29mm

Sharply Curved 51x25mm

Curved 70x38mm

Round Flat
76mm

Stock#

12.419 Buy

$208.99

12.425 Buy

$201.99

12.420 Buy

$208.99

12.421 Buy

$208.99

12.422 Buy

$105.85

12.446 Buy

$99.99

Heavy Rounded Planishing Stakes For making bowls, dishes and trays. Each of these stakes has a highly polished working surface. Made in USA Stock # 12-717, in Stake Holders, is the right stake holder for these stakes.

Use	Dishes & Medium Trays	Large Bowls	Small Bowls	Large Trays
Diameter	98 mm	140 mm	102 mm	137 mm
Surface radius		127 mm	76 mm
Stock #	12.714 $150.99	12.713 $189.30	12.712 $189.30	12.715 $167.60

Forming & Raising Stakes Raising is the technique of forming metal with hammers and stakes into the basic shape of the object being created. Each of these stakes has a highly polished working surface. Made in USA Stock # 12.788 in Stake Holders, is the right stake holder for these stakes.
Stake
Use	Dome-For shaping small rounded objects such as ladles.	Depressed- Horn shape, ideal for working depressed surfaces	Anvil- For small conical and rectangular work.	Slight Round Inverted Rocker- Center width 38 mm tapering to 32 mm at tips	Spoon or Ladle Head- For shaping small rounded objects such as ladles
Specs	51 mm diameter	254 x 32 mm	305 length x 32 x 9.5 mm	298 mm long	51 mm
Stock#	12.501 $108.00	12.514 $343.99	12.512 $282.99	12.509 $290.99	12.502 $108.00

Stake
Use	Rounded Top w/Angular Face	Knob Ends	Slight Round, Undercut End & Rolled End- Center width of 38 mm tapering to 32 mm at tips	Combination- Anvil shaped, 254 mm long with one cylindrical arm 83 mm long, 35 mm diameter and the other arm 102 mm long by 38 mm wide. Flat top 70 x 38mm	Curved Ends- Length 184 mm with working faces 35 mm wide.
Specs	64 mm	29 mm & 22 mm	298 mm Long	254 mm Long	184 Long
Stock#	12.504 $137.99	12.513 $336.99	12.510 $283.99	12.503 $335.99	12.505 $271.99

Stake for Making Fine Tableware All working surfaces are highly polished.		Large Special Purpose Stake

Stake	# 90 High dome for cups and ladles. 64mm diameter by 51mm.	# 116 For forming cylinders, such as cups and jiggers, as small as 1" diameter. Stake is (14") 355 mm long.
Stock#	12.690 $139.99	12.716 $222.99