![]() |
||
E-mail:![]() |
Fax: (973) 520-8779 | |
Clock & Watch Winders
Back
to
Watch
& Clock Repair Gateway
| Key Size Chart | |||||||||||||||||||
|
Key Size |
3/0 | 2/0 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| MM | 1.75 | 2.00 | 2.25 | 2.50 | 2.75 | 3.00 | 3.25 | 3.50 | 3.75 | 4.00 | 4.25 | 4.50 | 4.75 | 5.00 | 5.25 | 5.50 | 5.75 | 6.00 | 6.25 |
![]() |
Square Gauge Clock Keys Solves the problem of how to measure the square hole in a clock key. 18 sizes of squares from 1.75 to 6.00 mm, mounted on a metal plate. Permits the fitting of a clock key over the square to obtain the correct key size. Assures accuracy in ordering need keys. |
Type/Key Size | Stock# | Price |
| Bergeon, Swiss |
|
$99.30 | ||
| Economy |
|
$19.99 |
|
| Description | Stock# | Price | |
![]() |
Clock Spring Winder- For loop end mainsprings. Winds up on main wheel and arbor from clock. | CM24752![]() |
$12.30 |
![]() |
Clock Mainspring Winder- Simplifies the problem of placing the clock mainspring into the barrel. The barrel is held in place by a bench vise. The crank handle is used to wind the spring into the barrel. contains eight barrels ranging from 18 mm to 65 mm. Swiss made | 30076![]() |
$1,414 |
![]() |
Clock Mainspring Winder- For winding hole end clock mainsprings. With 3 different size hooked arbors for most spring sizes. Length 4". Used in a bench vise. Swiss made. | 4126![]() |
$261.30 |
![]() |
Wire Loop Pliers- Holds inner coil of mainspring when adjusting or forming to fit the barrel arbor. Stepped nose design, with one round and one concave jaw, allowing smooth looping. See.. Looping Pliers | ||
| Description | Size | Stock# | Price | ||
![]() |
Bergeon
Winders
for 2-piece Winding Stem Movements Swiss tools used for winding movements that have two-piece winding stems. |
Set of 2 Tools |
|
$91.00 | |
| Male Tool |
|
$46.00 | |||
| Female Tool |
|
$46.00 | |||
![]() |
Watch
Mainspring Winders for Unbreakable Mainsprings Unbreakable mainsprings require a specially designed barrel arbor hook not found on conventional type mainspring winders |
Set of 17, sizes 3-3/4L to 24
L 5.3mm to19mm O.D. |
|
$885.00 | |
| Set of 7, sizes 3-3/4L to 12 L 5.6 mm to 9.8 mm O.D. |
|
$426.85 |
About Shor |
New |
On Sale |
Contents & Search Page
© 2012. Shor International Corporation. All rights reserved.










