About Shor  New

On Sale

To Place an Order

  Contents & Search Page

Jeweler's Vises, Jigs & Holders
Back to Bench Tools Gateway       Ring Clamps & Cutters       wpe1.jpg (1671 bytes) Setting Tools & Holders
See also:  Third Hand Tweezers           wpe8.jpg (4008 bytes)Ring Drilling Quadrant         Tool Holders

 

Pearl/Bead Drilling Vises
Also see Pearl Holding Tweezers

Grobet Pearl/Bead Drilling Vise-

  • Holds all popular size pearls securely in position for drilling.
  • Knurled locknuts provide quick clamping and releasing action.

Stock # 53.0660   Price $8.10

 

Precision Pearl/Bead Drilling Vise-

  • Bead & Pearl drilling is made easy with this clever vise. 
  • Two brass cupped jaws hold the stone securely and lined up perfectly centered to allow drilling from both sides without breaking or cracking.
  •  The hole is large enough to accept a 1 mm drill bit.  Use with Shor high speed twist drill bits.

Stock # HOL-178.00   Price $39.95

 

Tube & Miter Cutting Vises and Holders
 

Miter Cutting Vise

  • This Swiss-style miter vise, made of hardened steel, is used for holding wire and sheet up to 11mm wide at both 45° and 90°.
  • A stop bar is included to perform consistent cuts repeatedly.

Stock # VIS-550.00   Price $61.95
 

Tube Cutting Jig-

  • Our original design, developed by Shor in the early 1950's, is back!  
  • Back by popular demand, same as the original design, except a PVC coated handle for easy, comfortable grip. 
  •  The thumb lever secures the tube and the groove in one side of the head assures a straight cut every time.
  • Made of tool steel, The handle is PVC coated. Length is 5.5" (140mm).

Stock # HOL-108.00   Price $39.95

Tube Cutting Holder-

  • This tube holder can be attached to the bench or held by a bench vise.
  • Slots at the end assure straight cutting and the guide can be set for multiple cuts when doing production work.

Stock # HOL-110.00   Price $36.95
 

Tube Cutting Pliers-

  • Make it easy for the user to hold tubing or small rods while sawing.
  • This version of the duck billed pliers features a narrow groove down the center of the jaws for the sawblade to follow.
  •  Pliers will hold tubing from 2.0 mm to 10 mm diameter.
  • Length is 7" (175mm).

Stock # PLR-833.00   Price $26.95

Tube Holding Pliers-

  • Tube Holding Pliers are made to hold tubing gently but firmly when cutting, filing or doing other operations
  • Nylon jaws (shown in pix at left) are designed to hold virtually every size tube and will not scratch.
  •  Jaws may be replaced
  • Total length of pliers is 6½" (165mm) long.

Pliers Stock # PLR-848.00   Price $24.95                                            Replacement Jaw Stock # PLR-848.05      Price $5.95

 

Bench Vises

Clamp Mini Bench Vise

  • Jaws are just 1 inch wide!
  • Cast cast iron with heavy enamel coating
  • Clamps onto bench

Stock # VIS-214.10   Price $6.95

  

Mini Bench Vise

  • Jaws are just 1 inch wide!
  • Cast cast iron with heavy enamel coating
  • Made to screw permanently on your bench

Stock # VIS-215.10   Price $6.95
 

Revolving Clamp Mini Bench Vise

  • Jaws are just 1¼ inch wide
  • Revolves for convenient positioning
  • Cast cast iron with heavy enamel coating
  • Clamps onto bench

Stock # VIS-310.00  Price $15.95

  

Revolving Mini Bench Vise

  • Jaws are just 1¼ inch wide
  • Revolves for convenient positioning
  • Cast cast iron with heavy enamel coating
  • Made to screw permanently on your bench

Stock # VIS-311.00   Price $16.95

1½" & 2" Bench Vises-

  • Can be either clamped or screwed onto bench
  • Available with either 1½" or 2" jaws.

1½" Jaw Vise Stock # VIS-204.00     Price $9.45
2" Jaw Vise Stock # VIS-204.20         Price $9.45

Tabletop 3" Clamping Swivel Vise-

  • Don't let the economical price fool you.  This tabletop vise is good quality and very functional.
  • 3" jaw width.
  • Jaws have tough rubber lining to prevent scratch of soft metals
  • Wide clamp opening to fit tables up to 21/8" thick.
  • Ball and socket configuration allows the jaws to be tilted and rotated 360°, but holds jaws firmly at any angle.

Stock # VIS-350.00   Price $18.95
Universal Ball Joint Swivel Vise with Vacu-Base. Completely portable, attaches instantly to any smooth, nonporous surface. Large 3", V grooved, iron jaws open to 3" with precision screw action. Universal ball joint rotates vise two any desired working angle. Includes a set of protective rubber jaws.
Vise Stock # 58.103                                Price  $62.99    
Replacement Jaws Stock #58.10301      Price $3.70

 

    Stock# Price
Bracelet Holder- Saves time when setting stones, while eliminating the need for messy shellac. Suitable for prong, pave or channel settings on bracelets up to 7 mm (9/32") wide and will not mar or distort. Has space on outer side for clasps. Made of aluminum with diameter of 3½". Hex wrench included. HOL-122.00 $24.95
Universal Work Holder- 

The 4 movable pins accommodate large and small items during engraving or repair.  Jaws screw in and out to securely hold items in place.  Set of 4 replacement pins come with holder.		 Holder HOL-166.00 $18.95

Set of 4 Pins

 HOL-166.04 $2.95
Wood Handled Hand Vise- A lightweight vise mounted in wood handle. Smooth jaws are 1½" wide and open to 1". Overall length is 6½" 58.130 $11.99
Steel Hand Vise, 1½" Wide Jaws- Has spring action in handle to keep jaws open. Jaws open to 7/16". The insides of the jaws are serrated and are closed by turning wing screw. Overall length is 3½". 58.120 $24.95
Steel Hand Vise,½" Wide Jaws- Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to ½". Overall length is 4½". 58.140 $32.50
Steel Hand Vise, 5/8" Wide Jaws- Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to 1/4". Overall length is 4½". 58.141 $32.50
Lowell Pattern Hand Vise- With hollow handle and grooved corrugated jaws that open and close by turning handle. Design allows you to hold long wire pieces not possible with regular hand vise. Width of jaws is ½". Overall length is 4½". 58.0528 $24.45

 

 
Martini Holders
Made to hold three prong "martini" mountings.  Each die adapts to the accompanying pin vise.  The pin vise holds the mounting in place so that the jeweler can close each prong with a pair of pliers.  Fast and easy.  Three sizes-  small, medium and large.  Set comes complete with a pin vise.
Description Stock# Price
Martini Holder, Small HOL-167.05 $5.95
Martini Holder, Medium HOL-167.10 $5.95
Martini Holder, Large HOL-167.15 $5.95
Martini Holder, Set of all 3 HOL-167.00 $20.95

 

Pin Vises Capacity Length Stock# Price
Baby Pin Vise- Midget size, hollow handle metal pin vise with screw chuck. 0-.020" 13/8" 58.200 $6.40
Double Ended Pin Vise- Different size steel collets are mounted in both ends of the hollow handle. 0-.099" 4½" 58.215 $8.50
Swivel Head Pin Vise- With large free wheeling head, making it suitable for drilling, tapping, using as a screwdriver, etc. Comes with 2 double ended collets, one in screw chuck and the other stored in handle 0-.125" 3½" 58.221 $7.40

Wood Top Pin Vise-  Offers the user a multi-chuck pin vise that is more comfortable to use than conventional hex head vises. The rounded head fits comfortably into the palm of one's hand making it much easier to drill, ream or twist. 

 0-.125" 4" PIN.224.00 $4.99
Wood Handle Pin Vises- Economical pin vise with black fluted wood handles and steel chucks. 0-.047" 4" 58.231 $7.99
0-.059" 4½" 58.232 $7.99
Double Ended Pin Vise- With reversible steel collets in each end. Hexagonal heads prevent rolling. Hollow handle and heads made of brass. 0-.125" 43/8" 58.240 $7.40
Pin Slide- Knurled ring slide forward to close steel jaws, making it easy to operate with one hand. Handle is hollow. 0-.051" 43/8" 58.300 $12.80
Square Chuck Pin Vise- Has 2 steel chucks with spare chuck in the end of the hollow brass handle. Will not roll off bench. 0-.079" 3½" 58.250 $8.65
Brass Handle Pin Vise- Steel collet is set into hollow brass handle with screw chuck. 0-.028" 33/8" 58.205 $5.50
Long Handle Pin Vise- American made aluminum pin vise.  Often used for holding needle files and various other hand tools .125-.140" 5" PIN-222.00 $2.25
Precision Pin Vises- Tool steel collets grip firmly when screw chuck is tightened. Chromium plated handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. The larger portion is smooth so it can be held precisely in lathes and drill presses. 0-.040" 3" 58.280 $8.90
0.25-.062" 3½" 58.281 $9.60
.050-.125" 33/8" 58.282 $14.10
.115-.188" 4½" 58.283 $15.75
Set of 4 Pin Vises 0"-0.188" 3"-4½" PIN-240.00 29.95

 

About Shor  New

On Sale

To Place an Order

  Contents & Search Page

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net