It's the tried and true jewelers' hard soldering flux. Yellow green
and self-pickling, it is the best in water based fluxes. Well mixed
to eliminate suspension. Good for both hard soldering as well as
soft soldering. Use on gold, silver, platinum and other metals
with high melting points. Preserves temper and color of metal.
The adhesive qualities of this liquid flux hold solder in place.
16 oz
54.406
$8.95
Quart
54.408
$16.95
Gallon
54.410
$40.55
Johnson # 7-
A
quick and clean, creamy paste flux for silver brazing and hard soldering.
For use with all jewelers' metals including silver, gold, copper, nickel and
platinum. This has been a standard in the jewelry industry for many
decades.
12 oz
SOL.935.03
$9.95
Dandix/Handy Flux-
A very durable and powerful general purpose flux that protects your parts up
to 1600° F. It is an active fluoride-type flux which is appropriate for
all nonferrous metals and begins to melt and dissolve oxides at 600° F.
Paste formula can be cleaned up with hot water. A standard in the jewelry
industry for decades.
1 lb.
54.444
$18.15
Borax-
Prepared borax for making flux for soldering jewelry. Dissolves easily when
rubbed on borax slate.
4 oz cone
54.252
$7.45
Magic Boric-
Requires only that you dip the piece into the Magic Boric and solder- the
flux is built right in. No burn-off or waiting to solder. Magic Boric
prevents fire scale and will cut your soldering time by as much as 50%.
Non-flammable and non-hazardous
8 oz x 12pcs
CLN- 190.00
$99.95
JelFlux-
For
hard soldering with flame. Stays put like a paste. Will not run like a
liquid and yet is transparent. Eliminates blind joint soldering. JelFlux
produces less oxides and residues, allowing for faster pickling. With no
toxic fumes and it's biodegradable.
2 oz
54.438
$6.65
Flux Dispenser Pump-
compact, convenient 4 oz. polyethylene bottle with stainless steel pump
action lid. dispenses just the right amount of flux or other liquids. Pump
the lid lightly and the fluid is dispensed into the well. the one way pump
holds the fluid in the well of the cap, preventing contamination of the
unused fluid. For best results and to avoid clogging, the well should be
emptied and the cap cleaned between uses. Flux not included.
54.415
$23.99
Dandix Paste Flux-
For use in low temperature brazing and silver soldering ferrous and
non-ferrous metals. Begins to dissolve oxides at 800 F and is fluid active
between 1100 and 1600 F. Contains no fluoride.
1½ oz
54.440
$6.35
8 oz
54.442
$11.99
16 oz
54.444
$18.15
Vigor Creamy
Silver Brazing Flux- Spreads quickly and wets the surface
completely so alloys flow better. Protects from oxidation while heating and
retards discoloration of brazed area. Working temperature range is 1100-1350°
F. Excess flux can be removed with hot water. No waste or loss due to
drying, simply add water until creamy
2 oz
54.0340
$4.05
8 oz
54.0341
$10.75
Tix Flux- A
non-corrosive flux, harmless to hands or clothing. Washes off with water
even after drying. Works with any soft solder. Also see:
Tix Solder
½ oz
54.460
$4.90
Tix Anti-Flux-
Prevents solder from flowing to unwanted areas. Brushes on easily.
½ oz
54.462
$4.90
Kool-Jool-
Protects jewels from heat while soldering. No need to remove jewels from
settings (except opals) If flame is used for soldering, the jewel will stay
cool. Rinses off in plain water.
8 oz
54.468
$8.10
Heat Shield-
Protects components under direct 5000 F flame. Not necessary to remove stone
before soldering. Prevents oxidation and is odorless and nontoxic. Good for
dozens of applications. Washes off with water.
16 oz jar
54.448
$13.60
CoolCup- A jeweler's dream for soldering rings when
resizing. Just fill the cup with cold water and submerge the stone and
mounting while soldering the shank. The stone stays cool.
Simple, but effective. CoolCup includes specially sized negative
locking tweezer designed to slip on and off the post. This is a tool
for virtually every jeweler.
SOL-700.00
$12.95
Yellow Ochre Anti-Flux-
The most time tested anti-flux, used for generations to prevent solder from
flowing onto unwanted areas. Simply mix with water or alcohol and brush onto
areas you want to mask from the solder.
Back
to 
Solders
