Swiss Files- Hand, Equalling &
Joint Rd. Edge
All Files are double cut (cross cut) unless
otherwise noted
|
|
Hand
Parallel in width and tapered in thickness. Only one edge
cut. Top and bottom are double cut but edge is single cut. |
|
Equalling
Parallel in width and thickness. All sides cut. Top
and bottom are double cut but edges are single cut. |
|
Joint Round
Edge Cut on sides only. Single cut. |
Back
to 
Files Gateway Page
 |
Equalling Files
Parallel in width and thickness. All sides cut. Top and
bottom are double cut but edges are single cut. Used primarily for
filing slots and corners.
|
|
| Cross Section |
Length |
Width |
Thickness |
Cut 00 |
Price |
Cut 0 |
Price |
Cut 2 |
Price |
Cut 4 |
Price |
|
4" |
13/32" |
5/64" |
|
|
|
$22.10 |
|
$23.85 |
|
$27.80 |
| 6" |
½" |
7/64" |
|
$24.55 |
|
$26.10 |
|
$28.15 |
|
$32.70 |
| 8" |
21/32" |
1/8" |
|
$33.80 |
|
$35.70 |
|
$38.75 |
|
|
|
Equalling,
Special Thickness Files |
|
| Cross Section |
Length |
Width |
Thickness |
Cut 0 |
Price |
Cut 2 |
Price |
Cut 4 |
Price |
|
4" |
13/32" |
.047" |
|
$25.80 |
|
$28.15 |
|
|
| 4" |
13/32" |
.035" |
|
|
|
$28.15 |
|
$32.35 |
| 4" |
13/32" |
.031" |
|
$25.80 |
|
$28.15 |
|
|
| 4" |
13/32" |
.028" |
|
|
|
$28.15 |
|
$32.35 |
| 4" |
13/32" |
.022" |
|
|
|
$31.15 |
|
$36.45 |
| 4" |
13/32" |
.018" |
|
|
|
$31.15 |
|
. |
| 4" |
13/32" |
.014" |
|
|
|
$30.15 |
|
$35.20 |
| 6" |
�" |
.083" |
|
$31.60 |
|
$34.30 |
|
|
| 6" |
�" |
.065" |
|
$31.60 |
|
$34.30 |
|
|
| 6" |
�" |
.047" |
|
$31.15 |
|
$34.30 |
|
|
|
Equalling Needle Files |
|
|
 |
Knurled Handles |
|
|
 |
Plastic Handles |
|
| Length |
Cut 0 |
Price |
Cut 2 |
Price |
Cut 4 |
Price |
Cut 6 |
Price |
Cut 0 |
Price |
Cut 2 |
Price |
Cut 4 |
Price |
| 10 cm. |
|
$12.25 |
|
$12.25 |
|
$13.50 |
|
|
|
$13.85 |
|
$13.85 |
|
|
| 14 cm. |
|
$10.15 |
|
$10.15 |
|
$10.65 |
|
|
|
$11.70 |
|
$11.70 |
|
$12.25 |
| 16 cm. |
|
$11.00 |
|
$11.00 |
|
$11.35 |
|
$15.15 |
|
$12.60 |
|
$12.60 |
|
$12.95 |
| 20 cm. |
|
$14.65 |
|
$15.20 |
|
$15.20 |
|
|
|
|
|
|
|
|
Valtitan
Equalling Needle Files
For platinum, stainless steel, exotic
plastics and other hard to file materials.
The hardest surface known
Rockwell hardness 72HRc. Best
performance on hard-to-file surfaces. Little or no clogging, a simple
knock is enough to remove the chips. Highly resistant to corrosion.
Swiss. |
|
|
|
|
Length |
Cut 00 |
Price |
Cut 0 |
Price |
Cut 2 |
Price |
| 16 cm |
|
$19.20 |
|
$19.20 |
|
$19.20 |
|
Economy Equalling
Needle Files
Well made, yet economical , Swiss needle files,
made of chrome alloy steel. Cut portion is 3" long. |
|
|
|
|
Length |
Medium (#2) |
Price per Dz. |
Fine (#4) |
Price per Dz. |
| 14 cm. |
|
$49.40 |
|
$55.00 |
|
Single Cut
Equalling Needle Files
Single cut files, in addition to
being much more economical than the standard double cut, have
an advantage that they do not clog as easily as double cut files. |
|
|
|
|
Length |
Cut 4 (fine) |
Price |
| 14 cm. |
|
$5.20 |
|
Equalling
Escapement Files
Also known as square handled needle files,
these precision files have a length of cut of about 2�". |
|
|
|
|
Length |
Cut 2 |
Price |
Cut 4 |
Price |
Cut 6 |
Price |
| 14 cm. |
|
$17.40 |
|
$19.40 |
|
$22.95 |
 |
Hand Files-
Parallel in width and tapered in thickness. Only one edge cut. Top
and bottom are double cut but edge is single cut. |
|
| Cross Section |
Length |
Width |
Thickness |
Cut 00 |
Price |
Cut 0 |
Price |
Cut 1 |
Price |
Cut 2 |
Price |
Cut 3 |
Price |
Cut 4 |
Price |
Cut 6 |
Price |
|
|
4" |
17/32" |
1/8" |
|
|
|
$15.55 |
|
|
|
$16.75 |
|
|
|
$19.45 |
|
|
| 6" |
½" |
5/32" |
|
$18.45 |
|
$17.80 |
|
$20.45 |
|
$21.15 |
|
$22.40 |
|
$24.55 |
|
$37.60 |
| 8" |
29/32" |
3/16" |
|
$25.50 |
|
$24.45 |
|
$28.05 |
|
$29.05 |
|
|
|
$33.85 |
|
|
| 10" |
1" |
¼" |
|
$34.90 |
|
$36.95 |
|
|
|
$39.90 |
|
|
|
|
|
|
| 12" |
13/16" |
5/16" |
|
$46.85 |
|
$49.70 |
|
|
|
|
|
|
|
|
|
|
Valtitan Hand Files
For platinum, stainless steel, exotic
plastics and other hard to file materials.
The hardest surface known
Rockwell hardness 72HRc. Best
performance on hard-to-file surfaces. Cut 0 has blunt end. Cut 2 has
pointed end. |
|
|
Little or no clogging, a simple knock is enough
to remove the chips. Highly resistant to corrosion. Swiss. |
|
|
Length |
Width |
Thickness |
Cut 00 |
Price |
Cut 0 |
Price |
Cut 2 |
Price |
| 6" |
½" |
5/32" |
|
$31.25 |
|
$33..90 |
|
$35.55 |
| 8" |
29/32" |
3/16" |
|
$43.05 |
|
$45.55 |
|
$49.10 |
 |
American Pattern
Hand Files- The Hand file is used primarily for rapid metal
removal on sharp corners, shoulders and flat surfaces. Only one edge
cut, reducing damage to the workpiece when filing up to a corner.
Top and bottom are double cut but edge is single cut. Swiss
made. |
|
| Cross Section |
Length |
Width |
Thickness |
Bastard Cut |
Price per Dz. |
2nd Cut |
Price per Dz. |
|
6" |
5/8" |
5/32" |
|
$71.99 |
|
$88.99 |
| 8" |
25/32" |
7/32" |
|
$97.99 |
|
$115.99 |
| 10" |
31/32" |
�" |
|
$130.99 |
|
$152.99 |
| 12" |
15/32" |
9/32" |
|
$191.99 |
|
$197.99 |
 |
Habilis Hand
Files
For the "in-between" jobs- bigger than a needle file but
smaller than a standard file. Length of cut is 4" with an overall
length of 8�". |
|
|
Width |
Thickness |
Cut 00 |
Price |
Cut 1 |
Price |
| 3/8" |
1/8" |
|
$16.10 |
|
$16.10 |
 |
Joint Round Edge
Files- Parallel in width in thickness, with rounded edges,
these files are cut on the edges only and the edges are single cut.
Cut is number 2. |
|
| Cross Section |
Thickness in Inches |
.059" |
.047" |
.039" |
.035" |
.032" |
.028" |
.024" |
.020" |
.016" |
|
Thickness in MM |
1.5 |
1.2 |
1.0 |
.9 |
.8 |
.7 |
.6 |
.5 |
.4 |
| Stock# |
|
|
|
|
|
|
|
|
|
| Price |
$28.15 |
$28.15 |
$26.50 |
$26.55 |
$26.50 |
$26.50 |
$26.50 |
$26.50 |
$26.50 |
