| |
Quadrant
Parts |
Price |
 |
Posalux Autodivider Main Shaft with Bushing- |
|
|
Divider Plate, Old Style, for
Posalux Divider- 150 x 110 mm |
|
|
SV-12 Collet Expander- The
Shor V Collet Expander is a marvelous little tool that allows an
ordinary lathe to be used to texture and cut wedding bands and bangle
bracelets. If you plan to do lathe millgraining or diamond polishing, this
tool is literally indispensable. With the SV 12, a set of collets and a
lathe, a whole world full of textures opens up:
- Airscribing (laser finishes, bark finishes
etc.) lathe millgraining
- Diamond polishing
- An almost infinite range of textures and
finishes
- Finishes that were possible before but did
not yield consistent or uniform results are now consistent, uniform and
much more easily and quickly accomplished.
|
$295.00 |
| |
Gears for Std. Ring Quadrant,
32-60 Tooth- Toothed portion diameter approximately 35
mm. Specify number of teeth required when ordering gears. |
$175.00 |
|
Gears for M1 Ring Quadrant,
72-120 Tooth- Toothed portion diameter approximately 40
mm. Specify number of teeth required when ordering gears. |
$175.00 |
|
Gears for M-10, M11 Ring
Quadrants, 72 & 120 Tooth- Toothed portion diameter
approximately 40 mm. Specify 72 or 120 tooth when ordering gears. |
$175.00 |
|
Gears, Dividing, for SV-12,
60, 90, 96 Tooth- Toothed portion diameter approximately
80 mm. Specify 60, 90, or 96 tooth when ordering gears. |
$175.00 |
|
Gears, Brass,
for Posalux- 60 mm diameter, 12mm hole |
$175.00 |
|
Ring Collet
Motorizing Assembly Brass Gear-
Gear diameter 52 mm. Center hole 18 mm diameter. |
$90.00 |
|
Mounting Bracket for Motorized
Ring Quadrant- 62 mm x 45 mm |
$25.00 |
|
Ring Quadrant Mounting Bolts,
TD- To attach the quadrant to the
table |
$25.00 |
|
TD Pawls |
$85.00 |
|
Mounting Base for TD Pawls |
$75.00 |
|
M1 Pawls |
$100.00 |
|
TD Divider Handle-
45 mm overall length |
$5.00 |
|
Operating Handles, SV12 Quad,
TD- 72 mm to 110 mm length |
$15.00 |
|
Release Levers for TD
Automatic Flat Divider- 110 mm long |
|
 |
Operating Handle, Old Style
for Posalux and M3 Ring Quadrants |
$20.00 |
 |
Operating Handle for M11 Ring
Quadrants |
$25.00 |
|
End Plates for TD Ring
Quadrant- Plates range in size from
30 mm long to 80 mm long |
$75.00 |
|
Ring Quadrant Divider
Selection Gauge for Posalux |
$85.00 |
 |
Oval Turning Divider Head- |
|
|
Oval Turning Divider Base- |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|